Categories

System glitches and false alarms can be exasperating, and even worse, could prevent your home security system from working how it should. Fortunately, most issues, from dead batteries to false alarms, are easy to correct. Take a look at our tips for troubleshooting your home alarm system in Rockford. We’ll help keep your family safe and your system operating the way it should.

Test Your Home Security System In Rockford

One sensible way to troubleshoot your property’s defense is to test it! The latest systems permit you to place them in test mode to avoid prompting an emergency call. Once in test mode, do the following:

• Turn on your system as you normally would when you exit your home.
• Open a window or door that has a contact sensor, or test other sensors. Close the window or door once you’re done so it doesn’t prompt the alarm as you reactivate the system.
• Let the alarm resonate for 60 seconds to make sure a signal is dispatched to the security company and an entry is made in the alarm system log.
• Proceed to test equipment as you wish
• Check the system activity log to validate that everything’s working.

Don’t worry, monitoring professionals can see that your alarm system is involved in a test. Be sure to turn test mode off when complete. It’s wise to test every other month or anytime you adjust your home’s phone or internet service.

Check The Position And State Of Motion Sensors

Although an essential aspect of your alarm system, motion sensors are prone to false alarms. Do your part to prevent them with some easy troubleshooting.

• Conduct a visual check. Are there things that could move within the path of the sensor, like a window treatment taken by a breeze?
• Is the sensor dirty? Cobwebs, dirt, and debris can cause malfunctions. Check to confirm the sensor is clean.
• Does the motion detector offer pet immunity you can activate? Some sensors can be programmed to ignore pets weighing up to 100 pounds.
• When was the battery last replaced? Low batteries may impact performance or cause false alarms.
• Is a heat source affecting the sensor? Excessive heat from direct sun or a fireplace can cause an alarm.

Keep Batteries Ready And Pay Attention To Low Battery Warnings

One helpful benefit of the latest home security systems is that they’ll notify you when batteries are getting low. If your system has a control panel or smartphone app, you’ll usually find alerts there. Depending on your system, you could notice an intermittent beep when batteries are getting low. 

Contact sensors, smoke detectors, motion sensors, and other wireless components have batteries that will have to be replaced every 1 to 2 years. It’s a good idea to keep batteries on hand and create a replacement schedule. Top systems also include a rechargeable backup battery for the primary control panel. This backup keeps your system running if your power goes out and should recharge once power is back online. If it fails to recharge, you should replace it.

Troubleshooting Is Effortless With ADT Home Security In Rockford 

As the leading name in home security, ADT designs systems that supply unrivaled protection and functionality. Accessing test mode is easy through the ADT+ app or MyADT.com, and you’ll always be sent alerts when a battery is nearing depletion. Reach out to Secure24 Alarm Systems, an authorized ADT dealer, to find out more and design a system perfectly suited to your Rockford home. Place a call to (815) 242-2899 or complete our form today!