ADT® Authorized Dealer Serving Rockford & Surrounding Areas
Carbon monoxide detector attached to wall of home
January 08, 2024

Where To Place Carbon Monoxide Detectors In Your Rockford House

Residents must safeguard against a variety of risks like burglary, fire, and flooding. But what about a danger that can’t be discerned by human senses? Carbon monoxide is different from other threats because you may never be aware that it’s there. Despite that, installing CO detectors can easily protect yourself and your household. Explore more about this potentially lethal gas and where to place carbon monoxide detectors in your Rockford property.

What Is Carbon Monoxide?

Referred to as the silent killer as of a result of its absence of color, odor, or taste, carbon monoxide is a commonly found gas caused by an incomplete combustion of fuels. Any appliance that utilizes fuels like a fireplace or furnace can produce carbon monoxide. While you typically won’t have any trouble, issues can present when an appliance is not routinely serviced or properly vented. These mistakes could lead to a build-up of this dangerous gas in your home. Generators and heating appliances are the most consistent causes for CO poisoning.

When in contact with lower amounts of CO, you might experience fatigue, headaches, dizziness nausea, or vomiting. Continuous exposure to higher amounts can cause cardiopulmonary arrest, coma, and death.

Suggestions For Where To Place Rockford Carbon Monoxide Detectors

If your home doesn’t have a carbon monoxide detector, get one now. Preferably, you should use one on each floor, and that includes basements. Here are a few recommendations on where to place carbon monoxide detectors in Rockford:

  • Place them on every level, particularly in areas where you utilize fuel-burning appliances, like water heaters, furnaces, gas dryers, and fireplaces.
  • You ought to always install one within 10 feet of sleeping areas. If you only install one carbon monoxide detector, this is where to put it.
  • install them approximately 10 to 20 feet away from sources of CO.
  • Do not install them immediately next to or above fuel-utilizing appliances, as a small amount of carbon monoxide may be discharged when they turn on and trigger a false alarm.
  • Fasten them to walls about five feet from the ground so they may measure air where people are breathing it.
  • Avoid putting them in dead-air areas and next to doors or windows.
  • Put one in areas above attached garages.

Inspect your CO detectors often and maintain them in accordance with manufacturer instructions. You will typically have to replace units every five to six years. You should also make certain any fuel-consuming appliances are in in optimal working shape and have proper ventilation.